Bearing Manufacturer Malaysia, Cylindrical Roller Bearing Supplier Selangor, Deep Groove Ball Bearing KL ~ Feiken Bearing Sdn Bhd

Mechanical Seal Malaysia, Selangor, KL, Petaling Jaya

Mechanical Seal
A mechanical seal is an advanced sealing device used to prevent the leakage of fluids in rotating equipment, such as pumps and compressors. It consists of two main components: a rotating element attached to the shaft and a stationary element mounted in the equipment housing. The sealing faces of these elements come into contact to create a leak-tight seal.

Features and benefits:

Excellent sealing performance
Higher temperature resistance
Reduced maintenance

Item Code	Bore Diameter	Outside Diameter Small Taper	Outside Diameter Lock Nut	Width	Width Lock Nut	Width Lock Nut Including Lock Washer	Mass
	d1	d	d3	B1	B	B4	m
	mm						kg
H204	17	20	32	24	6	7	0.036
H205	20	25	38	26	7	8	0064
H206	25	30	45	27	7	8	0.086
H207	30	35	52	29	8	9	0.12
H208	35	40	58	31	9	10	0.16
H209	40	45	65	33	10	11	0.21
H210	45	50	70	35	11	12	0.24
H211	50	55	75	37	11	12.5	0.28
H212	55	60	80	38	11	13	0.31
H213	60	65	85	40	12	13.5	0.36
H214	60	70	92	41	12	13.5	0.539
H215	65	75	98	43	13	14.5	0.74
H216	70	80	105	46	15	17	0.81
H217	75	85	110	50	16	18	0.94
H218	80	90	120	52	16	18	1.1
H219	85	95	125	55	17	19	1.25
H220	90	100	130	58	18	20	1.4
H222	100	110	145	63	19	21	1.8
H304	17	20	32	28	6	7	0.04
H305	20	25	38	29	7	8	0.071
H306	25	30	45	31	7	8	0.095
H307	30	35	52	25	8	9	0.14
H308	35	40	58	36	9	10	0.17
H309	40	45	65	39	10	11	0.23
H310	45	50	70	42	11	12	0.27
H311	50	55	75	45	11	12.5	0.32
H312	55	60	80	47	11	13	0.36
H313	60	65	85	50	12	13.5	0.42
H314	60	70	92	52	12	13.5	0.67
H315	65	75	98	55	13	14.5	0.78
H316	70	80	105	59	15	17	0.95
H317	75	85	110	63	16m	18	1.1
H318	80	90	120	65	16	18	1.3
H319	85	95	125	68	17	19	1.4
H320	90	100	130	71	18	20	1.6
H322	100	110	145	77	19	21	2.05
H2304	17	20	31	32	6	7	0.049
H2305	20	25	38	35	7	8	0.087
H2306	25	30	45	38	7	8	0.165
H2307	30	35	52	43	8	9	0.165
H2308	35	40	58	46	9	10	0.224
H2309	40	45	65	50	10	11	0.280
H2310	45	50	70	55	11	12	0.362
H2311	50	55	75	59	11	12	0.420
H2312	55	60	80	62	11	13	0.481
H2313	60	65	85	65	12	14	0.557
H2314	60	70	92	68	12	14	0.897
H2315	65	75	98	73	13	15	1.05
H2316	70	80	105	78	15	17	1.28
H2317	75	85	110	82	16	18	1.45
H2318	80	90	120	86	16	18	1.69
H2319	85	95	125	90	17	19	1.92
H2320	90	100	130	97	18	20	2.15
H2322	100	110	145	105	19	21	2.74
H2324	110	120	155	112	20	22	3.19
H2326	115	130	165	121	21	23	4.6
H2328	125	140	180	131	22	24	3.55
H2330	135	150	195	139	24	26	6.63
H2332	140	160	210	147	26	28	9.14
H2334	150	170	220	154	27	29	10.20
H3120	90	100	130	76	18	20	1.9
H3122	100	110	145	81	19	21	2.3
H3124	110	120	155	88	20	22	2.7
H3126	115	130	165	92	21	23	3.45
H3128	125	140	180	97	22	24	4.1
H3130	135	150	195	111	24	26	4.7
H3132	140	160	210	119	25	28	7.25
H3134	150	170	220	122	26	29	8.1
H3136	160	180	230	131	27	29.5	9.15
H3138	170	190	240	141	28	30.5	10.5
H3140	180	200	250	150	29	31.5	12
H3164	300	320	400	226	42	56	36.3
H3168	320	340	440	254	55	70	52

Applications

Mining & Construction

Oil & Gas

Pumps & Compressors

Agriculture

Oil & Gas

Food Processing Machinery

Marine

FAQ

Q: Can mechanical seals handle dry running conditions?

Most mechanical seals require a film of fluid for lubrication and cooling. Dry running conditions can lead to rapid wear and failure of the seal faces. Specialized mechanical seals with dry-running capabilities may be available for specific applications.

Q: How do I prevent leakage in a mechanical seal?

Proper installation and regular maintenance are crucial in preventing leakage, ensuring a clean and properly aligned shaft and housing, using the correct seal components, and providing adequate.

Q: Can mechanical seals be repaired or reconditioned?

In some cases, mechanical seals can be repaired or reconditioned by replacing specific components. However, it depends on the extent of the damage and the design of the seal.

1/1

mechanical